PA State Archives Hours, Directions, & Fees Research Topics Online Catalog Land Records

 

 

 

 

Pennsylvania Historical and Museum Commission
Bureau of Archives and History
Pennsylvania State Archives

MG-393 

Pullman-Standard Collection
Standard Steel Car Company-Butler Works

Container Listings

 

{series #393m.23}

MG-393 

Pullman-Standard Collection
Standard Steel Car Company-Butler Works
Publicity Records 


Slides, 1964-1981 (bulk: 1979-1981) (7 volumes)

carton 3


{series #393m.24}

MG-393

Pullman-Standard Collection
Standard Steel Car Company-Butler Works
Technical Records

 Drawings and Specifications

 

Box Car General Arrangement Drawings, 1900-1955. (1 volume)

 

  flat box 1

 


{series #393m.25}

MG-393

  Pullman-Standard Collection
Standard Steel Car Company-Butler Works
Technical Records 

Drawings and Specifications 

Brake and Truck Layout General Arrangement Drawings, 1943-1965. (1 volume)

 

flat box 2



{series #393m.26}

MG-393

Pullman-Standard Collection
Standard Steel Car Company-Butler Works
Technical Records 

Drawings and Specifications  

Car and Truck Component Manufacturers’ Listings, 1953-1960. (1 volume)

 

flat box 14

 

{series #393m.27}

MG-393

  Pullman-Standard Collection
Standard Steel Car Company-Butler Works
Technical Records 

Drawings and Specifications 

Center Construction and Underframe General Drawings, 1903-1928. (1 volume)

flat box 13


{series #393m.28}

MG-393 

Pullman-Standard Collection
Standard Steel Car Company-Butler Works
Technical Records

Drawings and Specifications 

Chinese Government Railway Specifications, Drawings, and Procedures, 1903. (1 volume)

 

flat box 3



{series #393m.29}

 

MG-393

  Pullman-Standard Collection
Standard Steel Car Company-Butler Works
Technical Records

Drawings and Specifications 

Die Drawings, 1902-1964. (52 boxes)

 

long box 1

Drawer #33, October, 1902 to September, 1909 (w/tracing number and date)
#O-4 Inside Hopper-Sheet for C& O Car, #137, n.d.
#H-44B 4“ Notching Knife Hammond Plant, no nr. given, 3-l6-07
#N-60B 6” & 8” Radius Shear Newcastle Plant, no nr. given, 3-27-07
#O-97D Die For End Sill-Face Plate, #265, 10-10-02                   
#O-lllA Tie Beam Web Plate, #627, 10-09-02
#H-56A Corner Post Cap-Hammond Plant, #l7452F, 7-22-07
#O-l89 Bottom Follower Guide Westinghouse Draft Gear C.&A. Gondola Car, #593,
ll-8-02
#O-l90 End Sill Face Plate, #550, 4-25-l6
#O-292B Cross Hood-L.V. Hopper Car, #403A, l2-l7-02
#O-298 End Sill, #807, 5-l0-l6
#O-357-C Inside Hopper Sheets, #l6l38, 2-l7-06
#O-479 Center and Side Sill, #l539, 5-22-03
#O-488 D End Sill, #ls220, 9-l2-07
#O-527A Cross Bearer, #737, l0-3l-07
#O-767C Inside Hopper Sheet, #2892A, 5-3l-04
#O-768 Lower Deck Hood Sheet, #B-l076, 5-3l-04
#O-773 B Upper Deck Hood Sheet, #B-l095, 6-28-09
#O-787 Center Sill, #308l, 6-30-20
#O-787 Center Sill, #308l, 2-l3-07
#O-787 Center Sill, #3081, 7-25-31
#O-787A Center Sill, #3081, 2-13-07
#O-87l Cross Hood, #3590, l0-3-04
#O-895F Cross Bearer, #3807A, l0-22-06
#O-902 Inside Hopper Sheet, #4005A, ll-5-04
#O-905A Side Hopper Sheet, #4l84, ll-ll-04
#O-925 Side Hopper Sheet, #3959, ll-2l-04
#H-935 Cross Hood Sheet, #4329A, l-26-07
#O-l006 Side End Floor Sheet, #Bl5039, l-25-05
#O-l0ll Draft Sill, #Bl5l02, 3-9-05
#H-l032A 6” Notching Knife-Hammond Plant, no nr. given, 3-9-0
#O-l04l Transom Motor Truck-Side Frame, #B-8366, 2-l5-05
#H-l044 7” x l0” Radius Shear, Hammond Plant”, no nr. given, 3-25-07
#O-l072 Draft Sill, #4535, 3-28-05
#O-ll00C Bolster Web Plate, #46l7, 4-08-05
#O-lll3B End Piece 6 Wheel Steel Truck, #l3l483, 5-04-05
#O-lll5C Floor Sheet, no nr. given, 5-06-05
#O-ll28B, Bolster Web Plate, #l522, 6-l2-05
#O-ll32C Side & Center Sill-Bottom Flange Angle, #l5l40, l0-l9-05
#O-ll53D Body Bolster, #l564l, 8-3l-0
#O-ll55C Cross Bearer, #l564l, 9-ll-05
#O-ll59 Draft Sill, Second Operation, #l564l, l0-22-l0
#O-ll67 Inside Hopper Sheet, #l5709, 9-30-05
#O-ll83A Hopper Door, #l5709, l0-09-05
#O-ll90E Floor Sheet, #2889, l0-l9-05
#O-l2l7A Cross Bearer, #l5794, ll-04-05
#O-12l9C Side Hopper Sheet, #l5932, ll-20-05
#O-l220C Spacing Carriage, no nr. given, ll-2l-05
#O-l237B Inside Hopper Sheet, #l02l0, l2-08-05
#O-l294 Draft Sill-lst Operation, #l7462, ll-ll-l5
#H-l309 Oblong & Round Punch, #6 Gag  Punch, no nr. given, 7-l9-07
#O-l309 Oblong & Round Punch Power Punching Machine, no nr. given, 4-l6-06
#O-l333 Bolster Diaphragm, #l6268, l-9-07
#H-1334B Top Corner Cap, #l8487D, l0-2l-07
#O-l360A End Frame Motor Truck #8564, 5-22-06
#N-l360 End Frame New Castle Plant, #8564, 11-7-10
#O-1366 Inside Hopper Sheet, #16695, 6-5-06
#O-l367 Outside Hopper Sheet, #l6695, 6-l3-06
#O-l386 Knife for End Sill Cover Plate, #l6937, 7-9-06
#O-l388 Cross Bearer, #l6937, n.d.#O-l4l8F Brake Beam, #l6650A, 8-l4-06
#N-l423 Double L Knife for Newcastle Plant Coping Machine, no nr. given, 2-2-07
#H-1423 Double L Knife for Hammond Plant Coping Machine, no nr. given, 2-27-07
#O-l423 Double L. Knife For Big Coping Machine, no nr. given, l8-l7-06

long box 2

#O-l442A Center Sill, #l698l, 9-l0-06
#O-l446 Blanking Knife for Bolster Center Brace, #l69l0, 9-22-06
#O-l458 End Sill, #l70l2, 9-27-06
#O-l459A Bolster Diaphragm, #l7254, l0-l2-06
#O-l464C Cross Bearer, #l7254, l0-l2-06
#O-l482C Center Floor Cover Plate, #l6998, 9-28-06
#O-l563A Draft Sill, #l7462, l-ll-07
#O-1626B Knife For Truck Bolster, #l589, 2-l2-07
#O-l660A Side Hopper Sheet, #l9334, 3-2-07
#O-l664 Inside Hopper Sheet, #l9359, 4-l4-l6
#O-l665A Side & End Floor Sheet Gusset, #l9l09, 3-l3-07
#H-l667 C Notching Knife for Cross Hood Sheet, #4329A, 3-l5-07
#O-l667C Notching Knife for Cross Hood Sheet, #4329A, 6-07-07
#H-l686A Notching Knife for Center Floor Sheet, #2889D, 3-25-0
#H-l688A Blanking Knife for Bolster Center Brace, #2885A, 3-22-07
#O-l69lA Hopper Door, #l9360, 3-30-07
#H-l692A 9 1-8” Notching Knife-Hammond Plant, no nr. given, 4-2-07
#H-l7l8 King Pin Tool Holder 75 Ton Punching Press, no nr. given, 4-23-07
#O-l724B Outside Hopper Sheet, #l9240A, 5-2-07
#O-l730A Cross Bearer, #l9l54, 5-9-07
#O-l78lA End Frame, #9l34, 6-l7-07
#N-l79l  End Frame Motor Truck-Newcastle Plant, #9l07, ll-ll-07
#H-l873 End Roof Cap, #20074, 8-22-07
#O-l864A End Sill, #l9024, 8-l3-07
#O-l906A Cross Bearer, #l9599, 8-26-07
#O-l846 Transverse Brace, #20l76, 9-l9-07
#O-l953D Side Stake, #20l70, 9-l3-07
#O-l957A Diagonal Brace, #20l73, 8-l3-07
#O-l959, Reservoir Support, #20648, l0-23-07
#O-l977 End Floor Sheet, #20095, ll-0l-07
#O-l983 Brake Mast Stirrup, #l6770, ll-29-0
#O-l948 Center Floor Sheet, #l6l274, l0-2-07
#O-2027 Longitudinal Floor Support, #20l76, l2-24-07
#O-2028 Press Steel Carline, #20958, l2-30-07
#O-2l29 Floor Sheet, #2l326, 3-l7-08
#O-2l36A Side Sheet, #2l469, 4-9-08
#O-2l38C Intermediate Roof Plate, #2l6l2, 4-l0-08
#O-2l57 Roof Sheet, #2l72l, 4-25-03
#O-2l77 Side Sheet Top Angle 2nd Operation, #ll305, 8-l8-28
#O-2l78 Side Sheet Top Angle 2nd Operation, #ll305, 8-l5-28
#O-2l86A Side Sheet, #22036, 5-28-0
#H-2202 Lower Roof Carline, no nr. given, 6-22-0
#H-22l6 9---32” Lock Washer “H&I Mach.”, no nr. given, 7-
7-08
#O-2237 End Frame Motor Truck, #l0405, 8-l7-0
#H-223lB Sidepost lst Operation, #l00032, 9-l5-0
#H-2266 Lower Deck Hood Sheet, #l00040, 9-l7-08
#H-2266 Lower Deck Hood Sheet, #100040, 9-l7-08
#H-2273B Arched Ventilator Plate, no nr. given, 9-l9-08
#H-2282C Draft Sill-lst Operation, no nr. given, l0-l-08
#H-2295B Draft Sill–2nd Operation, no nr. given, l0-l0-08
#H-2304 End Post, #l00205, ll-2-l5
#H-223lB Side Post 1st Operation, #l00032, 9-l5-08
#H-2358 2 ½” Notching Knife Over Hanging Coping Mach., #100093, l0-l6-08
#H-2368 Full Arched Roof Stiff. -2nd Operation, #l002l7, l0-30-08.
#H-24l7 Platform Hood, no nr. given, l2-l5-08
#H-2437B Side Floor Sheet, #23445, l-5-09
#H-2440C Bottom Side Sheet, #23402, l-8-09
#H-2446A Body Bolster Web Plate, #23486, l-l3-09
#H-2450A Bolster Cover Plate, #23410, 1-12-09
#H-2452 Drop Door, #2344, l-l9-09
#H-2503B Lower Deck Hood Sheet, no nr. given, l –l-09
#H-2507A End Rail, #l00746, l-27-09
#H-25l8 Deck Plate Bottom, no nr. given, 2-l2-09
#H-2525C Cover Plate For End Sill, #l0l0l2, 2-l5-09
#H-2542 End Roof Sheet, no nr. given, 2-25-09
#H-2623 Step Hanger, #l0l257, 3-25-09
#H-2626 Ventilator Hood Partition, #l0ll06, 3-25-09
#O-265lC Bottom Brake Mast Support- 2nd Operation, #23460, 4-5-09
#O-27l4E Spring Seats, no nr. given, 4-28-09
#O-2724 Brake Mast Support, #242l3, 5-4-09
#O-2748C Bolster Web Plate-1st Operation, #ll055l, 8-l2-09
#H-2767 Side Door Header, #l0l476, 8-3l-09
#H-2254 Roof Sheet no nr. given, 9-l-08
#H-2256B Upper Deck Hood Sheet, #l000l4, 7-24-08
#H-2825 Lower Hood Sheet, #l0l5l3, 7-l7-09
#H-2826 Lower Roof Carline-1st Operation, #l0l524, 7-l9-09
#O-2830A Carline 3rd Operation, #ll07ll, 7-23-09
#O-284l Hood Sheet, #ll0792, 8-l0-9
#H-2933 Carline 1st Operation, #l00956, 9-l-09
#O-2980 Brake Mast Support, #25250, 9-20-09
#O-3000 General Arrangement For Circle Driving Device, no nr. given, l-ll-06
#O-300lB Air Cylinder For Circle Driving Device, no nr. given, l-ll-06
#O-3002 Circle Driving Device, no nr. given, l-ll-0
#O-3009 Frame Standard Coping Machine, no nr. given, 3-2l-06
#O-3023B Heating Chamber Front Etc., no nr. given, 3-22-06
#O-3030 Furnace, no nr. given, 3-l4-06
#O-3038 Main Gear-Standard Coping Machine, no nr. given, 3-26-06
#O-3047 Arrangement Of Operating Gear, no nr. given, 4-2-06
#O-3062 Air Cylinder For Arch Bar Furnace, no nr. given, 5-8-06
#O-3068 Crane Details For Arch Bar Furnace, no nr. given, 5-14-06
#O-3070 Bed Plate For Cylinder Bull Press, no nr. given, n.d.
#O-307l Big Cylinder Bed, no nr. given, 4-l7-06
#O-3072 Small Cylinder Bed, no nr. given, 5-l-06
#O-3073A Big Cylinder & Plungers For Bull Press, no nr. given, 4-23-06
#O-3074A Small Cylinder & Plungers For Bull Press, no nr. given, 5-l-06
#O-3077A Vertical Power Punch For Steel Car Forge Co., no nr. given, 6-22-06
#O-3079 Details For Charging Buggy, no nr. given, l-3-06
#O-3080 Details For Charging Buggy, no nr. given, 7-5-06

long box 3

 

Drawer #34, July, 1906 to March, 1911 (range and date of rolls)
#O-3081-#O-3315, 7-12-06 to 3-5-09
#O-3355-#O-3480, 6-28-09 to 9-23-09
#H-3517-#O-6459, 3-31-10 to 3-9-11

long box 4

 

Drawer #35, April, 1911 to January, 1921 (w/tracing number and date)
#O-653l Carline-3rd Operation, #ll0387, 4-29-ll
#O-6578 Notching Knife For Center Floor Sheet, #29437, 4-24-ll
#O-6579 Lower Deck Hood Sheet, #lll236, 5-8-ll
#O-6734 Tie Bar, #29899, 6-28-ll
#O-6745 Sub Side Sill, #29955, 6-28-ll
#O-6808 Platform Side Sill-2nd Oper., #lll64l, 7-3l-ll
#M-6849 Notching Knife For l5” Channel, no nr. given, 8-l6-ll
#O-687l End Hopper Sheet, #30373, 8-25-ll
#N-6898 Motor Bar, #l3877, 9-l6-ll
#N-6934 Coping Knife for Equalizer Bar, #l3756, 9-22-ll
#O-6940 Longitudinal Ridge Sheet, #3047l, 9-25-ll
#O-6983 Break Beam Channel, #30594, l0-27-ll
#O-6997 Notching Knife For l2” Channel, #30250, l0-l8-ll
#O-7053 Side Frame, #l4036, ll-l0-ll
#H-7065 Cross Bearer Diaphragm 1st & 2nd Operation, #l04355, ll-2l-ll
#O-7ll3 Gear Cover, no nr. given, l2-l9-ll
#H-7390 Lower Deck Carline, 1st Operation, #l05522, 4-l-l2
#O-7443 Side Bearing Pocket, #ll9-C-48, ll-l9-35
#O-745l Roof Sheet, #3l776, 4-l3-l2
#O-7499 Gang Punch For Center Plates, Coping Mach., no nr. given, 4-29-l2
#O-7503 Table For Support Of Side Sheet, no nr. given, 2-20-l9
#O-7509 l000 Ton Press-General Drawing, no nr. given, 5-2l-26
#O-75ll 500 Ton Press General Drawing, no nr. given, l-4-l2
#O-75l5 Details-500 Ton Press-Valve Arrangement, no nr. given, l-8-l2
#O-75l9 Foundation For l000 Ton Hydraulic Press, no nr. given, l-ll-l2
#O-7520 2” Hydraulic Double Stem Poppet Valve, no nr. given, l-l3-l2
#O-7521 500 Ton Press, Foundation Plan, no nr. given, 1-16-12
#O-7522 4 ½” Hydraulic Check Valve, no nr. given, l-l8-l2
#O-7523 l000 Ton Press Details of Casting, no nr. given, 2-13-l2
#O-7524 6” Hydraulic Check Valve l000 Lbs Pressure Sq In., no nr. given, 2-23-l2
#O-7536 Coping Machine, Motor Driven, no nr. given, 2-26-l2
#O-7537 Coping Machine, Foundation Plan, no nr. given, 2-26-l2
#O-7540 500 Ton Hydraulic Press, Forging Details, no nr. given, 2-29-12
#O-7547 1 ½” Hydraulic Double Acting Valve, no nr. given, 3-ll-l2
#O-7553 Foundation & Pipe Arr’gt. For l000 Ton Hydraulic Press, no nr. given, 8-8-l2
#O-7554, l00 Ton Crank Press, Details of Column, no nr. given, 9-l0-l2
#O-7555 l00 Ton Crank Press, Details of Top Bolster, no nr. given, 9-l0-l2
#O-7556 l00 Ton Crank Press, Details of Bottom Bolster and Die Plate, no nr. given, 9-l0-l2
#O-7557 l00 Ton Crank Press, Details of Sliding Head, no nr. given, 8-l2-l2
#O-7559 l00 Ton Crank Press, Details of Adjustment, no nr. given, 8-l4-l2
#O-7560 l00 Ton Crank Press, Details of Forging, no nr. given, l0-l5-l2
#O-7563 Pipe Arr’g’ment, 500 Ton Press, no nr. given, 8-30-l2
#O-7564 Foundation Plan, 500 Ton Press, Hydraulic, no nr. given, 8-30-l2
#O-7566 Details of Piping, 500 Ton Press, Hydraulic, no nr. given, 9-4-l2
#O-7569 Gen Arr’g’ment For Piping & Presses, no nr. given, 9-6-l2
#O-7573 Gen Arr’g’ment For Piping & Presses, no nr. given, 9-l8-l2
#O-7575 l00 Ton Crank Press, Details of Motor Plate, Gears, no nr. given, l0-2-l2
#O-7577 l00 Ton Crank Press, Details of Clutch & Counter Wt., no nr. given, l0-l7-12
#O-7585 l00 Ton Crank Press, General Drawing, no nr. given, l0-29-l2
#M-7594 Rolling Machine Details, no nr. given, l2-30-l2
#H-7597 Guide Arrangement For Jig Punch, no nr. given, l-2-l3
#O-7655 Center Sill, #3l772, 5-20-l2
#H-773l Carline-1st Operation, #l05863, 5-3l-l2
#H-7733 Carline- 3rd Operation, #l05863, 6-l2-l2
#O-779l Split I-Beam Carline–1st Operation, #32l85, 6-23-l2
#H-7857 Pantagraph Roof Sheet, #l06l63, 6-25-l2
#O-7868 Bolster Top Plate, no nr. given, 7-9-l2
#O-7905 Roof Sheet, #32245, 7-23-l2
#O-8090 Tool For Draft Key Link, #3274l, 9-2l-l2
#O-8l50 Double L Knife Big Coping Machine, no nr. given, l0-4-l2
#O-8247 Center Sill, #33395, l2-l8-l2
#O-8269 Roof Sheet, #334l9, l2-23-l2
#O-8347 Bar Shear, no nr. given, l-2l-l3
#W-8349 Carline-1st Operation, #l06539, l-29-l3
#W-8350 Carline–2nd Operation, #l06539, l-3l-l3
#O-8359 Center Ridge Sheet, #33496, l-30-l2
#W-8408 Bolster Diaphragm, #l06507, 2-5-l3 
#H-8424 Lower Roof Carline, #l06409, 2-l2-l3
#W-8442 Body Corner Post, #l0653l, 2-l8-l3
#H-8453 End Channel, #l06547, 2-2l-l3#W-8454 Hood Sheet Connection, #l06545, 3-4-l3
#O-8473 Lower Deck Hood Sheet, #l06548, 2-25-l3
#H-85l8 End Hopper Side–2nd Operation, #33937, 2-24-l3
#W-8576 Step Side Edge, l065l7, 4-2-l3
#H-8577 End Sill & Platform Channel, #l06707, 4-2-l3

12-2412 long box 5

#H-8583 Bolster Diaphragm, #34l73, 4-l0-l3
#H-8584 Cross Bearer, #34l73, 4-l2-l3
#O-8743 Center Hopper Sheet, no nr. given, 8-ll-l3
#B-8748 Double L Knife, no nr. given, 8-23-l3
#B-8749 6” x 2l” Notching Knife, no nr. given, 8-28-l3
#B-8752 Bar Shear, no nr. given, 9-9-l3
#O-8757 Center Hopper Sheet End, #34729, 8-28-l3
#O-8767 Side Hopper Sheet, #34729, 9-l5-l3
#O-8794 Tool for Link for Door Oper. Gear, #34682-A, 10-10-13
#W-8800 Face Plate With Stripping Cyl., no nr. given, 2-3-l3
#O-8806 Top & Bottom Block ll7” Jig Punch, no nr. given, 4-l4-l3
#O-88l6 General Arrangement 117” Jig Punch, no nr. given, 4-23-l3
#O-8824 Jig For Tools For Coping Machine, no nr. given, 6-l0-l3
#O-8826 Details For Oper. Device of Clutch, l00 Ton Crank Press, no nr. given, l0-30-l3#O-8836 Rolling Machine and Details, no nr. given, l2-ll-l3
#O-8840 Vertical Crank Press, no nr. given, 2-2l-l4
#O-884l Blanking Knives Standard Face Plates, no nr. given, 3-5-l4
#O-89l8 Side Bearing Cap, #ll9-C-48, ll-l9-35
#H-892l Bolster Diaphragm, #34750, l0-6-l3
#O-8937 Tire Holder, #A-399, 6-l9-l4
#O-8990 Blanking Knife for Drop Door, #3473l, ll-28-l3
#O-899l Details of Blanking Knife for Drop Door, #3473l, ll-29-l3
#O-8994 Center Sill #35066, l2-4-l3
#H-90l6 Carline–1st Operation, no nr. given, l2-l0-l3
#H-90l8 Carline-3rd Operation, #l07289, l2-23-l3
#O-9035 Draft Key Links, #35l05, l-l2-l4
#O-9046 Top Cowl, no nr. given, 2-l8-l4
#O-9080 Blanking Knife For Cross Hood, #3473l-E, 2-l6-l4
#O-908l Blanking Knife For Cross Hood, #3473l-E, 2-l6-l4
#O-9085 Blanking Knife For Hopper Door, #348ll-D, l-28-l4
#M-9086 End Hopper Sheet – Issue A #43l4, 4-8-l5
#M-9086 End Hopper Sheet - Issue B #43l4, 2-5-l4
#O-9l24 Gang Punch No. 3 Machine, no nr. given, 2-6-l4
#O-9l35 Side Cowl, no nr. given, 2-l9-l4
#H-9l46 Side Plate, #l075ll, 2-25-l4
#O-9l49 Side Hopper Sheet, #35204, 2-27-l4
#O-9l73 Cross Bearer, #A-274, 3-24-l4
#O-9l8l Blanking Knife for Side Frame Motor Truck, #T-l4046, 3-24-l4
#O-9l83 Side Frame, #A-274, 3-l7-l4
#O-9l9l Details of Blanking Knives For Side Frame, #l4046, 3-2l-l4
#O-9l92 Blanking Knives for Spring Leaves, #A-28l, 3-l9-l4
#O-9209 Gasoline Tank & Tire Holder Support, #A-388, 4-20-l4
#O-9358 Notching Knife For Cross Hood Sheet, #358l6-B, 6-8-l4
#O-94l4 Front Door, no nr. given, 7-l6-l4
#H-9439 End Plate 1st Operation, no nr. given, 7-28-l4
#O-9440 Cross Bearer, #A-274, 7-29-l4
#O-9492 Brake Mast Support 2nd Operation,  #35968, 8-27-l4
#O-9548 Motor Arrangement No. 8-A Mult. Punch l30” Bet. Housings, no nr. given,
l0-l0-l4
#O-9549 Housing L.H. #8-A Mult. Punch l30” Bet. Housings, no nr. given, l0-l0-l4
#O-9550 Castings #8A Multi Punch-l30” Bet Housings, no nr. given, l0-l0-l4
#O-9552 Castings #8A Multi Punch-l30” Bet Housings, no nr. given, l0-20-l4
#O-9553 Castings #8A Multi Punch-l30” Bet Housings, no nr. given, l0-20-l4
#O-9554 Right Hand Housing, #8A Mult. Punch 130” Bet. Housings, no nr. given,  l0-20-l4
#O-9555 Forgings - #8A Mult. Punch 130” Bet. Housings, no nr. given, l0-20-l4
#O-9563 General Drawing #8A Multiple Punch, no nr. given, l0-30-l4
#O-9564 General Drawing For 5” Tube Spinning Machine, no nr. given, l-ll-l5
#O-9567 Bearing For 5” Tube Spinning Machine, no nr. given, 11-19-14
#O-9614 Draw Press Cyl. & Glands, no nr. given 2-3-15
#O-9620 General Arrangement of 100 Tons Draw Press, no nr. given, 3-5-15
#O-9621 Piston Details For 100 Tons Draw Press, no nr. given, 2-5-15
#O-9627 Feeding Arrangement For 100 Tons Draw Press, no nr. given, 3-2-15
#O-9629 Feeding Arrangement For 100 Tons Draw Press, no nr. given, 3-6-15
#O-9697 General Arrangement For 50 Tons Draw Press, no nr. given, 7-7-15
#O-9698 2”x3” Hydraulic Operating Valve 1000 Lbs per Sq. In., no nr. given, 7-12-15
#O-9700 Details of Casting For 2”x3” Hydraulic Operating Valve, no nr. given, 7-16-15
#O-9706 Stand For 1½” Valve Draw Press Details, no nr. given, 8-12-15
#O-9709 3”x3” Hydraulic Operating Valve 1000 Lbs. Per Sq. In., no nr. given, 9-2-15
#O-9710 Pipe Forging Automatic Turning Device, no nr. given, 8-30-15
#O-9716 100 Tons Draw Press Cyl. & Gland, no nr. given, 9-2-15
#O-9717 General Arrangement For 100 Tons Draw Press, no nr. given, 9-2-15
#O-9720 Arbor For Centering Chuck, no nr. given, 9-15-15
#O-9725 Main Plunger For 2000 Ton Bethlehem Press, no nr. given, 10-6-15
#O-9729 Piston Details For 170 Ton Draw Press, no nr. given, 10-26-15
#O-9736 Threading Machine Details, no nr. given, 11-1-15
#O-9737 Threading Machine Details, no nr. given, 11-1-15
#O-9738 Threading Machine Details, no nr. given, 11-1-15
#O-9740 Threading Machine Details General Arrangement, no nr. given, 11-17-15
#O-9749 Arbor For Centering Chuck, no nr. given, 11-11-15
#O-9751 General Drawing of Centering Chuck, no nr. given, 11-11-15
#O-9753 Outside Centering Chuck 6” Shell, no nr. given, 11-15-15
#O-9760 Roller Table Operation Details, no nr. given, 11-24-15
#O-9761 Swinging Table, no nr. given, 11-20-15
#O-9762 Conveyor For 12” & 9.2” Shell Hydraulic Cylinder, no nr. given, 11-26-15
#O-9763 Roller Table Frame, Conveyor For 12” & 9.2” Shell, no nr. given, 11-25-15
#O-9768 Conveyor For 12” & 9.2” Shell, Roller Table For Hydraulic Cyl., no nr. given, 12-1-15
#O-9770 Conveyor For l2” & 9.2” Shell-Hydraulic Cylinder, no nr. given, l2-l-l5
#O-977l Conveyor For l2” & 9.2” Shell General Arrangement, no nr. given, l2-3-l5
#O-9772 Conveyor For l2” & 9.2” Shell Roller Table Frame & Brackets, no nr. given, l2-3-l5
#O-9773 Conveyor For l2” & 9.2” Shell Girder for Bracket, no nr. given, l2-6-l5
#O-9775 Conveyor For l2” & 9.2” Shell General Arrangement For Chambersburg Press, no nr. given, l2-l0-l5
#O-9776 Conveyor For l2” & 9.2” Shell General Arrangement For Bethlehem Press, no nr. given, l2-l0-l5
#O-9778 General Drawing For Conveyor For 9.2” & l2” Shell, no nr. given, l2-l4-l5
#O-9786 Conveyor For 9.2” and l2” Shell-Discharging Chute For Chambersburg Press, no nr. given, l2-30-l
#O-9787 Conveyor For 9.2” & l2” Shell Discharging Chute For Bethlehem Press, no nr. given, l-l-l6
#O-9800 Threading Machine Bracket, no nr.given, 4-26-l6
#O-98ll Spring Winding Machine Frame, no nr. given, 3-20-l6
#O-98l2 Spring Winding Machine  Roller & Lever, no nr. given, 3-22-l6
#O-98l4 Spring Winding Machine Main Spindle, no nr.given, 3-22-l6
#O-98l5 Spring Winding Machine Worm Gear Casing, no nr. given, 3-2l-l6
#O-9820 Spring Winding Machine Friction Clutch Details, no nr. given, 4-4-l6
#O-982l Details For Chuck Bearing & Radial Attachment-Putnam Turret Lathe, no nr. given, 3-20-l6 
#O-9825 Spring Winding Machine Band Brake Details, no nr. given, 4-6-l6
#O-9826 Spring Winding Machine Clutch Details, no nr. given, 4-8-l6
#O-9829 Spring Winding Machine General Arrangement, no nr. given, 4-l9-l6
#O-9832 Threading Machine Belt Shifter Details, no nr. given, 4-28-l6
#O-9835 6” Shell Radial Attachment for Lathe, no nr. given, 5-l2-l6
#O-9840 Spring Winding Machine, Friction Clutch General Arrangement, no nr. given, 5-20-l6
#O-9855 Proposed Heating Furnace Hearth for Billets, no nr. given, 6-l4-l6
#O-9870 Details of Radial Attachment For Inside Radius of 6” Shell Mark 111L,
no nr. given, 7-l2-l6
#O-9874 6” Shell-Outside Centering Chuck  Details of Arbor And Jaws, no nr. given, 8-4-l6
#O-9875 6” Shell Radial Attachment For 22” Putnam Lathe-General Arr’t., no nr. given, 8-l-l6
#O-9904 Spring Winding Machine Details For Roller Lifting Device, no nr. given, 3-l5-l7
#O-9905 Spring Bar Bending Device, no nr. given, 3-l5-l7
#O-9906 General Arrangement Spring Bar Bending Machine, no nr. given, 3-20-l7
#O-9907 Frame Spring Bar Bending Machine, no nr. given, 3-16-l7
#O-99l4 Spring Winding Machine Friction Clutch, no nr. given, 4-27-l7

[Next Page]


PA State Archives Hours, Directions, & Fees Research Topics Online Catalog Land Records