PA State Archives | Hours, Directions, & Fees | Research Topics | Online Catalog | Land Records |
Pennsylvania Historical and Museum
Commission
Bureau of Archives and History
Pennsylvania State Archives
Drawer #47, November, 1940 to June,
1942 (w/ tracing number and date)
#BR-111 to #BR-481, 6-12-40 to 10-24-40 (unprocessed)
#US-l55-488 Floor Plan of Machinery For Machining l55 MM US Shells
M-l02 50 Per Hour, l2-2-40
#BR-489 Manufacturing Cost of 6 British Shell, ll-l-40
#BR-49l Spray Booth Bench 6 British Shell, S/O-94l6, l0-30-40
#BR-494 Trolley & Tongs In Use at Rotary Furnace For Billets,
ll-5-40
#BR-503 Truck For Transferring Shells From Bond Room to Storage or
Shipping Gross Capacity 2200 lbs., ll-8-40
#BR-504 Arrangement For Loading 6 Br. Shells in Box Car, Capacity
l0l4 Shells,
ll-ll-40
#BR-508 Estimate For Machining of 5.5 Inch British Shell Forging,
ll-l5-40
#US-l55-509 Details For Concentricity Gauge, Internal & External
Surfaces With Body U.S. l55 MM Shell, l2-l2-40
#US-l55-509 Details For Concentricity Gauge, Internal and External
Surfaces With Body, l2-l5-40
#US-l55-509 Concentricity Internal & External Surfaces With Body
(Indicator Gauge Assembly) US-l55 MM Shell, l2-9-40
#US-534 General Arrangement of Nosing Die For l55 MM Shell 300 Ton
Vertical Hydraulic Press, S/O 9273, ll-25-40
#US-547 Blanking Tool For Base Plate on l55 MM Shell, S/O9268, l2-2-40
#BR-556 General Arrangement of 2 Horizontal Drill Press For Operation
6-A, S/O-9269, l-20-4l
#BR-557 Gear Housing For 2 Horizontal Drill Press For Base of 6
British Shell, S/O-
9269, l2-5-40
#BR-558 Gear Housing Details For 2 Horizontal Drill Press Operation
6-A, S/O-9269, l2-l2-40
#BR-559 Chuck Details For 2 Horizontal Drill Press For Operation
6-A, S/O9269, l2-2l-40
#US-554 General Arrangement of Blanking Tool For l05 & l55 MM
Base Plate, S/O-9268, l2-l3-40
#BR-560 Frame Details For 2 Horizontal Drill Press For Operation
6-A, S/O-9460 &
9269, l2-3l-40
#US-565 Alternate Arrangement of Rolls & Draw Rings in 76 Ton
Press l05 MM Forging, l2-l0-40
#BR-577 Details of Piercing Die For 6 Br. Shell, S/O-9272, l2-l4-40
#BR-578 General Arrangement of Piercing Die For 6 Br. Shell, 500
Ton S.F. & M. Press, S/O9272, l2-l3-40
#BR-579 Details & Assembly
of Floating Centering Pin For Gisholt Machine For Operation #5, S/O-2062,
l2-l7-40
#BR-580 Estimate For Machining of 5.5 British Shell Forging, l2-l9-40
#BR-585 Layout of Forging Dept. For 6 British Shell, n.d.
#BR-588 Machine Layout of Second Operation For Additional 6 British
Shells, l2-27-40
#BR-6l4 Carboloy Cutting Tools British Shells, l-4-4l
#BR-6l6 Gauge Inside Nose of 6 Br. Howitzer Shell, l-3-4l
#US-6l8 Nosing Die Details For US-l55 MM Shells, l-8-4l
#BR-62l General Arrangement of Nosing Die For 6 British Shell, S/O-9274,
l-9-4l
#BR-622 Nosing Die Details For 6 British Shell, l-9-41
#US-630 No. l Producto Hand Miller Notching Fixture For l55 MM Shells,
S/O-9275,
2-l6-4l
#US-634 Spray Bench & Booth For l05 MM Shells Lot #l0l, l-20-4l
#BR-637 Truck For Annealing Nose of Shells After Nosing (Operation
#4), n.d.
#BR-639 New & Remachined Bushing Set Up For Nosing Die on 78 ½
Bliss Press 6 British Shell, l-23-4l
#644 Floor Plan Showing General Arrangement of Bins Tracks For New
Store
Room, n.d.
#BR-662 Nicking & Breaking Die 6 Square Billets (For 6 British
Shell) 425-Ton Henry Aiken Press, 2-5-4l
#US-665 General Arrangement of Piercing Die For l05 MM Shells, No.8
880 Ton M.H. Press S/O-94l9, 2-l8-4l
#US-l05-670 Spray Bench For l55 MM Shell, S/O-9448, 2-4l
#US-l05-675 Nose Heating Furnace For US l55 MM Shell, 2-l4-4l
#US-697 General Arrangement & Detail of Shell Tongs at Nosing
Press (l55 MM US Shells), S/O-9824,9586,9464, 3-3-4l
#US-7l3 Estimate to Increase l05 MM Educ. Machine Line to Produce
50 & l00 Shells Per Hour, 3-4-4l
#US-l55-723 US l55 MM H.E. M-l02 Shell, 3-l0-4l
#US-729 Concentricity Gauge For l05 MM US Shell Forging After Draw
Bench Operation, 3-l0-4l
#BR-733 Detail of Driving
Sheave & Clutch Plates For 75-H.P. B&B Roughing Mach. Oper.
#2, S/O-9466, 3-l5-4l
#BR-734 Clutch Details For 75-HP B&B Roughing Lathe (Operation
#2), S/O-9466, 3-l3-4l
#BR-735 Clutch Cylinder Details For 75-HP B&B Roughing Lathe 2nd
Operation, S/O- 9466, 3-l7-4l
#US-736 Cross Section Showing Upsetting of Billet & Details Required
For Alteration to l05 MM Piercing
Die, 4-l4-4l
#US-l05-744 General Arrangement of Tooling Fixture For Cutting Off
Open End No.5 Foster Machine, S/O-9484, l0-7-42
#US-746 Proposed Floor Plan of Machinery Machining 5 U.S. Navy Shells,
Rate Per Hour, Pullman Bldg. #2, 3-25-4l
#BR-75l Tongs For 6 & 4 Billet Furnace & Descaler, S/O-l09470,
n.d.
#US-755 Arrangement For Loading l55 MM U.S. Shells in Boxcar, Capacity
87l Shells, n.d.
#BR-756 5.5 Inch British Shell, 4-8-4l
#US-759 General Arrangement & Details For Seating Interior Base
of Forging, on Draw Mandrel l05 MM Forgings, S/O
9485, 4-l0-4l
#US-805 Floor Plan of Machinery Required For Machining 350-l05 MM
Shells Per Hour, n.d.
#BR-809 General Arrangement of B&B Thread Miller Showing Alteration
For Chucking of Shell, 4-28-4l
#BR-8l0 Chucking Details For Alteration to B&B Thread Miller (6
British Shells),
4-23-4l
#BR-8ll Cylinder Details For Alterations to B&B Thread Miller
(6 British Shells),
4-25-4l
#US-835 Shell Lifter at Spray Bench For l55 MM Shells, S/O-9490, 5-l-4l
#BR-842 Assembly of Spindle Shaft Brake For 75-HP B&B Roughing
Lathe (Oper. #2), S/O-9505,
5-7-4l
#BR-843 Details For Spindle Shaft Brake For 75-HP B&B Roughing
Lathe (Oper. #2), S/O-9505,
5-8-4l
#US-85l General Arrangement & Detail of Straightening & Hand
Feed of Material For Blanking Base Plates, S/O-9506, 5-l4
4l
#US-857 Assembly of Gauging Fixture For Welding Base Plates on l55
MM US Govt. Shells, S/O-9507, 5-22-4l
#US-858 Layout of Forging Dept. For US Govt. l05 MM Shells Line No.
l, 5-l9-4l
#US-859 Layout of Forging Dept. For US Govt. l05 MM Shells Line No.
2, June l94l
#US-86l Detail of Gauging Fixture For Welding Base Plates on l55 MM
US Govt. Shells, S/O-9507,
5-23-4l
#US-87l New & Remachined
Bushing Set Up For Nosing Die on 38 ½ Bliss Press l05 MM US. Shells,
6-7-4l
#US-872 Bench Fixture For Mechanically Running In & Of Nose Thread
Gauge, S/O-9543, 6-9-41
#US-875 Saws For Cutting Shell Forging Billets, 6-ll-4l
#US-876 New & Remachined Bushing Set Up For l55 MM Nosing Die,
6-l6-4l
#BR-877 General Arrangement Showing Alteration For Hydraulic Feed
on Gisholt Rough Turning Mach. (Oper #2), S/O
9542, 6-l2-41
#US-888 General Arrangement of 8 Piercing Die, S/O-9549, l0-6-4l
#US-889 Bottom Holder For Piercing Die (8 US Govt. Shell Forgings),
8-2l-4l
#US-890 Top Holder For 8 Piercing Die, S/O9549, 9-2-4l
#US-893 Details For Positioning Piercing Mandrels For 8 Piercing
Die, S/O9549, 9-15-41
#US-897 Hand Operating Stripper For 8 US Shell Piercing Die, S/O-9549,
10-27-4l
#US-898 Miscellaneous Details For 8 Piercing Die, S/O-9549, 10-4-41
#US-9l0 Production Analysis Machine Layout For Production of l600
per 8-hour day, 6-27-41
#US-9l4 General Arrangement For Experimental Piercing Die With Floating
Bushing For US Govt. l05 Forge, S/O-9548, n.d.
#BR-929 General Arrangement of Piercing Die For 5.5 British Shells,
500 Ton #6 MH Press, S/O-9564, ll-l8-4l
#US-930 Furnace For Heating Billets 8 US Govt. Forgings, S/O-9550,
7-8-4l
#BR-934 General Arrangement of B&B Thread Miller For Chucking
Shell, 5.5 British Shell, S/O-9566, 7-l6-4l
#BR-946 General Arrangement of Knurling Machine For 5.5 British Shells,
7-2l-4l
#BR-947 Knurling Machine Frame 5.5 British Shells, 7-l8-4l
#BR-948 Carriage Details For Knurling Machine For 5.5 British Shells,
S/O-9570, 7-2l-4l
#BR-949 Shaft & Bearing Details For Knurling Machine 5.5 British
Shells, S/O-9570,
7-2l-4l
#US-952 Fixture For Gauging Nose Threads For US l55 MM Shells, S/O-9579,
8-ll-4l
#BR-955 General Arrangement of Nosing Die For 5.5 British Shells,
7-l8-l4
#BR-964 Layout of 5.5 Shell Draw Press Rolls, 7-24-4l
#US-967 Layout of 5 Draw Rings For 8 Shell Forging, 7-25-4l
#BR-973 Concentricity Gauge For 5.5 Br. Shell Forging After Draw
Bench Operation, S/O-958l, 7-30-4l
#US-974 Spacing of Draw Rings & Assembly of Mandrel For 8 225
ton Draw Press, 8-4-4l#US-978 Layout For Forging 8 H.E. M-l03 US
Govt. Shells, 9-8-4l
#BR-980 4 Four Way Operating Valve Body, S/O-9758, 8-l8-4l
#US-983 Combination Overall Length & Base Thickness Gauge For
l55 MM U.S. Shell,
8-8-4l
#BR-994 Steel Details For Knurling Machine Frame Parts, 5.5 British
Shells, S/O-9570, n.d
#BR-l000 Rolls For 5.5 British Shells, 8-22-4l
#BR-l00l Rolls For 6 British
Shells, 8-4l
#US-l007 Proposed Arrangement For Heat Treating & Air Cooling
US l55 MM Shells,
8-27-4l
#US-l009 General Arrangement of Shell, Rotator on l05 MM US Shell,
S/O-9597, n.d.
#US-l0l3 Sprocket Frame Details For Rotator on l05 MM Shell Nosing
Furnace, n.d.
#BR-l0l7 Blanking Tool For 3 1/8 Dia. Base Plates Big M.H.& Co.
Coping Machine, S/O-9599, 9-3-4l
#US-l0l8 Descaler Roller Housing 8 Shell, 9-3-4l
#US-l028 General Arrangement of Cooling Conveyor For l05 MM U.S Forgings,
S/O-9600, l2-22-4l
#BR-l03l Details For Alterations to Carriage For Knurling 5.5 British
Shells, S/O-9570,
l2-30-4l
#US-l038 General Arrangement of Descaler For 8 Shell Forgings, S/O-9598,
9-l5-4l
#US-l040 Breaking Die For
8 ½ Billets For U.S. Govt. Shell H.E. 8 M-l03 425 Ton Henry-Aiken
Press, n.d.|
#US-l046 Assembly & Detail of Loading Equipment of 8 Billet Heating
Furnace, l0-l3-4l
#US-l047 Descaler Frame 8 Shell, S/0-9598, 9-23-4l
#US-l060 Proposed Heat Treating Arrangements For US l55 MM Shells,
9-27-4l
long box l9
#BR-l070 General Arrangement of Conveyor
Loader at Draw Press (125 x 65 Ton), S/O-9662, l0-6-4l
#BR-l07l Details of Conveyor Loader, S/O-9662, l0-2-4l
#US-l073 Heat Treating Arrangement For U.S. l55 MM & U.S. l05
MM Shells, l0-9-4l
#BR-l086 General Arrangement of Painting Turntable For 5.5 British
Shells, S/O-9663,
l2-2-4l
#BR-l087 Painting TurntableTop,
For British Shell 5.5, S/O-9663, n.d.
#BR-l088 Painting Turntable-Base, For British 5.5 Shell, S/O-9663,
ll-l0-4l
#BR-l089 Steel Details For Turntable For 5.5 British Shells, S/O-9663,
11-21-41
#US-l09l General Arrangement of l55 MM Piercing Die (#l3 Press), 500
Ton S.F.& M.Co. Press, S/O-9664, ll-l3-4l
#US-lll0 Special 6-Jaw Expanding Mandrel For l55 MM US Shell, l0-l3-4l
#US-lll2 Packing Ring Insert For 3 x 4 Four Way Valve, Baldwin Southwark
Draw Press, ll-3-4l
#US-lll6 General Arrangement of l00 Ton Draw Press For l55 MM Shells,
ll-l0-4l
#US-ll2l Assembly & Details of Loading Crane For 8 Billet Heating
Furnace, ll-7-4l
#BR-ll22 Inside Contour Gauge For 5.5 Br. Shell, ll-7-6l
#US-ll23 General Arrangement of Concentricity Gauge (After 2nd Operation)
US l55 MM Shells, S/O-9270, ll-l0-4l
#US-ll24 Concentricity Gauge Details (After 2nd Operation)
US l55 MM Shells, S/O-9270, 11-11-4l
#US-1126 General Arrangement of Conveyor Loader Draw Press (l00 x
75 Ton) #l3, S/O-9661, l2-l0-4l
#BR-ll29 Shell Rotating Details For Turntable For Painting 5.5 British
Shell, S/0-9663,
11-l4-4l
#US-ll42 Conveyor-Piercing Die to Draw Press, S/O-9730, ll-28-4l
#BR-ll46 General Arrangement of Comb. Gauge For 5.5 Inch British Shells,
ll-28-4l
#US-ll49 General Arrangement & Details of Jib Crane to be Used Over Etching Tank, l2-l-4l
#US-ll50 General Arrangement of Concentricity Gauge For 8 Govt. Forging,
S/O-9729, 12-3l-4l
#US-ll5l Frame Details For 8 Conc. Gauge, S/O-9729, l2-l8-4l
#US-ll52 Slide Details For 8 Forging Concentricity Gauge, S/O-9729,
l2-l2-41
#US-ll59 Detail & Assembly of Cooling Tank For l05 MM US Govt.
Forgings, S/O-
9600, l2-9-4l
#US-ll60 Detail & Assembly of Air Ducts For Cooling Tank For l05
MM US Govt. Forging, S/O-9600, l2-l5-4l
#US-ll64 US l55 MM H.E.M-l07 Shell, 12-12-41
#US-1170 General Arrangement of Conveyor Loader at Draw Press (225x
l25 Ton), S/O-9749, l2-23-4l
#US-ll73 General Arrangement & Details of Bar Grab at Saws For
8 Forgings, S/O-
9750, l2-20-4l
#US-1175 Piping Arrangement For Quenching Unit U.S l55 MM Shells,
ll-22-4l
#US-ll95 General Arrangement of Cooling Conveyor For l55 MM Forgings,
S/O-9752,
7-l0-42
#US-ll96 Frame Details For l55 MM Cooling, S/O-9752, 6-26-42
#US-ll97 Track Details For l55 MM Cooling Conveyor, S/O-9752, 6-29-42
#US-ll98 Guard, Spacer & Chain Details For l55 MM Cooling Conveyor,
6-30-42
#US-ll99 General Arrangement of Drive For l55 MM Cooling Conveyor,
7-7-42
#US-l208 Details of Conveyor Loader at Draw Press (l00 x 75 Ton),
S/O-966l, n.d.
#US-l2ll Cooling Conveyor 90 Deg. Turn Mounting Details B, l2-30-4l
#US-l2l2 Truck For 5 Ύ Square Billets at Cutting Torch, S/O-9755,
l-8-42
#US-l22l General Arrangement of Piercing Die For l05 MM Shells No.
8 M & H Press, S/O-9756, l-2l-42
long box 20
#US-l228 #l 6 Line Changed to #2, l55 MM Machining, l-9-42
#US-l235 General Arrangement of Nosing Die For l55 MM Shell, #78½
Bliss Crank Press, S/O-9757, l-l3-42
#US-l25l Suspension of Trolley Conveyor in l55 MM Bond Room, S/O-9737,
l-27-42
#US-l252 General Arrangement of Main Plunger For 2000 Ton Bethlehem
Press (#11),
l-26-42
#US-l253 Main Plunger Details For 2000 Ton Bethlehem Press (#11),
l-27-42
#US-l26l General Arrangement of Electric Arc Billet Nicker at Saws,
2-5-42
#US-l266 General Arrangement of Electric Arc Billet Nicker at Breaking
Die, S/O-9822, 2-6-42
#US-l269 Concentricity Gauge For 8 M-l03 Shell Forging After Draw
Bench Operation (Hot), 2-4-42
#US-l276 General Arrangement of 76 x 40 Ton Draw Press Showing Alterations,
S/O-2092, 2-l2-42
#US-l28l Plan View Showing Arrangements of U.S. l05 MM Heat Treating
Unit, 2-l0-42
#BR-l288 Top Die Holder For Piercing on #6 & #l3 Press, 2-l7-42
#US-l292 Proposed Arrangement of Ferrex Piercing & Extruding Forging
Method, 2-l9-42
#US-l298 Details of Nicking Machine, 3-l7-42
#US-l299 Concentricity Gauge For 8 M-l06 Shell Forging After Draw
Bench Operation, S/O-9929, 4-2l-42
#US-l30l Floor Plan & Piping Layout For Independently Operated
Hydraulic Unit For Piercing & Draw Press (Centrifugal
Pumps), 3-22-42
#US-l3l5 General Arrangement of No. 8 Rebuilt Draw Press (88 x 45
Ton), S/O-l0223, 2-6-43
#US-l3l6 Cylinder Details
For No. 8 Draw Press, S/O-l0223, n.d.
#US-l355 General Arrangement of Draw Press Showing Spacing of Draw
Rings For 8
M-l06 Shell, Forge Print 75-20-88, S/O-9927, n.d
#US-l36l Steel Details For Carriage For 7 3/8 Square Billet, S/O-l0l58,
l0-30-42
#US-l374 General Arrangement #6 Rebuilt Draw Press l06 x 38 Ton, S/O-l0l03,
ll-27-42
#US-l375 Cylinder Details For #6 l00-Ton Draw Press (l6 ½ Diameter
Ram), n.d.
#US-l382 General Arrangement of l55 MM Piercing Die, 500 Ton #6 Press,
S/O-l0034, 6-24-42
#US-l384 Descaler Frame & Details For 7 3/8 Square Billet, S/O-l0l58,
l0-30-42
#US-l393 Concentricity Gauge Details For l55 MM H.E. U.S. Shell, 6-4-42
#US-l394 Concentricity Gauge For Measuring Uneven Wall Thickness Below
Bourrelet For l55 MM Shell, 4-l3-42
#BR-ll5 Details of Piercing Die For 6 British Shell 6-40
#BR-l2l 6 Shell Die Plate For Hydraulic Forging Machine, 6-20-40
#US-l56 Educational Order No. 3l4-40-l530 Machining & Forging,
8-20-40
#US-l56 Educational Order No. 3l4-40-l530 Machining & Forging,
7-9-40
#US-39l Estimate For Machining of U.S. H.E. l05 MM Shell Forging,
9-9-40
#US-396 Estimate For Machining U.S. H.E. l05 MM Shell Forging, 9-ll-40
#US-l303 Arrangement & Details of Accumulator Supports and Foundation
For 40 Dia. x l96 Accumulator, 5-5-42
#US-l305 Details of Surge Tank For Centrifugal Pumps and Control Piping
For Make-Up Water, 6-30-42
#US-l309 Detail of Liquid Level Control Stand Pipe, 7-6-42
#US-l3llX General Arrangement of Electric Arc Billet Nicker For 8
½ Round Billets, 2-27-42
#US-l3l2 Torch Arm Details For Electric Arc Billet Nicker For 8 ½ Round Billets, n.d.
#US-l3l3 Carriage & Slide Details For Electric Arc Billet Nicker
For 8 ½ Round, 2-26-4
#US-l3l4 Plan View Showing Arrangement of Oil Quench Tank Pit For
U.S. l05 MM Heat Treating Unit, 2-27-42
long box 20
Drawer #48, April, 1942 to June,
1945 (w/ tracing number and date)
#US-l408 General Arrangement of 8 Piercing Die for 7 3/8 Square
Billets (M-l06) Forge Pry 75-20-88, l0-23-42
#US-14l7A Quench Tank Oil Strainer, 4-23-42
#US-l42l Piping Arrangement For 4th Heat Treating Unit
l55 MM M-l07 Shells, S/O-9938 Foundation, S/O-9939 Installation,
4-27-42
#US-l422 General Arrangement of Descaler For 8 Shell Forgings, 7
3/8 Square Billets Round Corners, 11-5-42
#US-l434 Heat Treating Arrangement For US l55 MM Shells, 4th
Unit, 5-6-42
#US-l450 General Arrangement of Concentricity Gauge For 8 M-l06 Cold
Forgings, S/O-9850, 5-l8-42
#US-l455 Concentricity Gauge Details For l05 MM H.E. Shells 5-22-42
#US-l456 Concentricity Gauge (General Arrangement) For l05 MM H.E.
Shells, 5-22-42
#US-l463 Nosing Die Data For 8 H.E. M-l03 Shell, 5-l9-42
#US-l474 Cam Details For l55 MM Shell B&B Roughing Lathe, 6-5-42
#US-l475 General Arrangement of Extension to Sloping Hearth, 8 Billet
Heating Furnace, S/O-9954, 5-28-42
#US-l479 General Arrangement of 4 Four-Way Operating Valve Body,
n.d.
#US-l483 Special 3-Jaw Compensating
Expansion Mandrel For l55 MM US Shells, 6-5-42
#US-l488 General Arrangement of Breaker Die, l000 ton press, 7 3/8
Square Billets, ll-l7-42
#US-l508A General Arrangement of Draw Furnace Chain Slack Adjuster
Discharge End, S/O-l003l, 6-l6-42
#US-l5l0 Draw Furnace Chain
Idler-Charging End, n.d.
#SK-l5llA Arrangement of Draw Furnace-Chain Idlers Charging End, 6-l8-42
#US-l5l2 Temporary Arrangement of #6 l25 Ton Draw Press For l55 MM
Shells, S/O-l0035, 6-22-42
#US-l5l5 General Arrangement & Details of Stairs & Walk For
Pit of 3rd Heat Treating
Unit l05 MM Shells, 6-30-42
#US-l5l6 4 Billet Shear for l05 m/m shell #l7 Bl6 coping machine,
7-2-42
#US-l5l8 Shell Lift Details For 8 Concentricity Gauge M-l06 Cold
Forgings, S/O- l0039, 7-2-42
#US-l520 Arrangement of Rolls on #l3 Draw Press l55 MM Forgings, 7-7-42
#US-l524 Chuck Details For l l/2 Horizontal Drill Press 4 1/2 Inch
Rocket, S/O-l0224, l-l8-43
#SK-l525 Changing of Quench Tank to Draw Furnace, Conveyor & Chute
3rd Heating Unit US l05 MM Shells, 7-8-42
#US-l528 Special 3 Jaw & Spider Expansion Mandrel For l55 MM H.E.
Shell, 7-l4-42
#US-l529 Cooling Tower Basin 4th Heat Treating Unit,
7-l5-42
#US-l532 General Arrangement of l55 MM Piercing Die (Inside Contoured
Forging) #l4 500 Ton Press, 9-l6-42
#US-l54l Concentricity Gauge For 8 M-l06 Shell Forging After Draw
Bench Operation (Hot), S/O-l0066, 7-l6-42
#US-l489 Bottom Casting For Breaking Die 7 3/8 Square Billets, For
8 M-l06, 6-8-42
#US l490 Top Holder Details For Breaker Die 8 M-l06 Forging, 6-8-42
#US-l49l Details For Breaking Die M-l06, 6-l0-42
#US-l493 Hydraulic Cylinders For Tool Block Bourrelet Finishing Lathe
l55 MM, 6-l7-42
#US-l494 Oil Pump Piping Arrangement For 4th Heat Treating Unit, 6-8-42
#US-l507B Details of Draw Furnace, Chain Slack Adjuster-Discharge
End, 6-l5-42
#US-l542 General Arrangement of 8 Piercing Die For 7 3/8 Square
Billets (M-l03), S/O-l0244, n.d.
#US-l543 Strainer For Water Cooling Tower On 4th Heat Treating
Unit, S/O-9939, 7-2l-42
#US-l553 Base Tool Holder For B&B Roughing Lathe, S/O-l0069, 8-l0-42
#US-l554 Rough Turn Concentricity Gauge For l55 MM Shell, 7-28-42
#US-l555 General Arrangement & Details of Stairs & Walk For
Pit of 4th Heat Treating Unit-l55 MM Shell, n.d.
#US-l556 Cam Details For l55 MM B&B Special Purpose Lathe (Roughing),
8-5-42
#US-l563 General Arrangement of Forming Die For 500 Lb. Bomb, 8-l8-42
#US-l566 Center & Cut-Off Conversion Mandrel For 5.5 British
Shell, 8-20-42
#US-l573 General Arrangement of Piercing Die For 4 ½ Rockets, No.
8 M.& H Press, S/O-l0l02, 9-9-42
#US-l595 Rough Turn Cam For Inside Contoured l55 MM Forging, l0-l0-42
#US-l596 Boring Bar, General Arrangement, l-6-43
#US-l597 Boring Bar & Feed Screw Details For Boring Draw Press
Cylinders, S/O-l0l07, 9-ll-42
#US-l597 Boring Bar & Feed Screw Details For Boring Draw Press
Cylinders, S/O-10107, l2-3l-42
#US-l6l6 Details For 4 ½ H.E. M-8 Rocket Testing Machine, S/O-l0l43,
l2-9-42
#US-l625 General Arrangement of Piercing Die For l05 MM Shells, No.8
M.& H. Press, S/A-2096, l0-l6-42
#US-l63l Bomb, G.P. 500 Lb., AN-M64 Metal Parts Assembly & Marking
Diagram,l0-6-42
#US-l634 Tool Holder For Machine
Radius on Draw Press Rolls, S/A-2096, n.d.
#US-l635 General Arrangement of Tool Fixture For Machine Radius on
Draw Press Roll American 24 Lathe, S/A-2096,
n.d.
#US-l644 General Arrangement For Machining Back End For Threading
& Face Base Operations, B&B Special Purpose
Lathe, S/O-l0220, l-22-33
#US-l645 Tool Post Details For Machining Back End For Threading Operation,
S/O-l0220, l-5-43
#US-l648 Tool Post Slide Details For Machining Back End For Threading
Operation, S/O-l0220, l-8-43
#US-l650 General Arrangement of Piercing Die For 4 ½ Rocket, No.8
M&H Press Rocket H.E. M-8, S/O-l0l36, l0-14-42
#US-l676 Nosing Die General Arrangement For 4 ½ Rocket H.E. M-8,
300 Ton Hydraulic Press, S/O-l0l44, l2-29-42
#US-l842 Layout Showing Proposed Passes For Forming Bomb Nose, For
(Bess.) 500 Lb. AN-M 64 Bomb), 2-5-43
#US-l845 Freight Car Dunnage 500 Lb. G.P. Bombs, 2-9-43
#US-l849 Details For Lug Testing Machine G.P. 500 Lb. AN M-64 Bombs,
S/O-10229, 3-10-43
#US-1854 Nosing Die Details For 4/1/2 Rocket H.E. M- 8, 2-l3-43
#US l855 Upsetter & Nosing Die General Arrangement For 4 ½ Rocket,
2-l6-43
#US-l856 General Arrangement of Piercing Die For l55 MM Shell Forging
M-ll6, #l3 500 Ton Press, S/O-l0268, 2-l9-43
#US-l866 General Arrangement l00 Ton Draw Press For l55 MM Shell Forgings
M-ll5 & M-ll6 #l3 Draw Press, S/O-l035l,
6-7-43
#US-l887 Stand For Induction Heater on Rocket Nose, S/O-l02ll, 3-4-43
#US-l89l Forging Die For Tail 500 Lb. AN M-64 Bomb, S/O-l0294, 4-l7-43
#US-l895 Shipping Band Assembly & Details For 500 Lb. G.P. AN
M-43 & AN M-64 Bombs, 3-3l-43
#US-l902 Hydraulic Cylinder For 8 Piercing Die Bale, S/O-l030l, 4-8-43
#US-l9l7 General Arrangement of Tube Cutting Unit For 500 Lb. AN M-64
Bomb, S/O-l0266, 4-l9-43
#US-l9l8 Details For Tube Cutting Unit Frame For 500 Lb. AN M-64 Bomb,
S/O-l0266, 4-8-4
#US-l9l9 Details For Tube Cutting Unit For Carriage & Lifter,
500 Lb. AN M-64 Bomb, S/O-l0266, 4 8-43
#US-l92l Details For Tube Cutting Unit at Sprocket Wheel For 500 Lb.
AN M-64 Bomb, S/O-l0266, -l4-43
#US-l922 Arrangement of Driving Unit For Burning Tubing to Length,
S/O-l0266, 4-23-4
#US-l929 Frame Stand and Details
For Vertical Lug Testing Machine, G.P. 500 Lb. AN M-64 Bomb, S/O-l0300,
n.d..
#US-l930 General Arrangement of Vertical Lug Pull Testing Machine,
G.P. 500 Lb. AN M-64 Bomb, S/O-l0300, 5-l0-43
#US-l936 Wall Thickness Gauge For U.S. 500 Lb. Bomb, 4-22-4
#US-l939 General Arrangement of Piercing Die For 4 ½ Rocket, No.
8 M&H Press, S/O-l0323, 5-l4 43
#US-l942 General Arrangement of #8 Draw Press 88x45 Ton For 4 ½ Rocket
H.E. M-8, S/O-l0324, 6-2-43
#US-l968 General Arrangement of 8 Piercing Die For Inside Contour M-l06 Forgings (7 3/8 Sq. Billet),
5-l8-43
#US-l970 Metal Fiber Grommet For l55 MM M-l15 B-l Smoke Shell, 5-2l-4
#US-2007 Tube Spinning Machine Frame, S/O-l0322, 6-l6-4
#US-20l0 Clutch & Brake Details For Spinning Machine, S/O-l0322,
6-22-4
#US-20l2 Spinning Machine Stand & Motor Pulley, S/O-l0322, 6-25-43
#US-2043 Details For Removing Centering Boss & Prelim. Bore Nose
For l55 MM M-ll5 B-l Smoke Shell on 2 Horizontal Drill Press, S/O-l0329,
7-43
#US-2044 Development Layout of Contouring For 240 MM H.E. Shell, 7-l4-43
#US-2045 Arrangement For Removing Centering Boss & Prelim. Bore
Nose For l55 MM M-ll5 B-l
Smoke Shell on 2Horizontal Drill Press, S/O-l0329, 7-l6-43
#US-2046 Adapter Forging Die For 78 ½ Bliss Crank Press, 7-l6-43
#US-2053 General Arrangement of Piercing Die For 4.5 T4 AP Projectile,
500 Ton Press #6, 7-22-43
#US-2072 Finished Shell Body,
Projectile A.P. 4 ½, T4, 8-25-43
#US-2075 Adapter Forging Die-Second Pass General Arrangement, S/O-l0377,
9-l-43
#US-208l Adapter Forging Die-First Pass General Arrangement, S/O-l0377,
9-l0-43
#US-2092 Shell H.E. 4 ½ M-65, Al, B-2 Metal Parts Assembly &
Details For U.S. Govt., 9-l0-43
#US-2l05 General Arrangement of Variation of Wall Thickness Gauge
For l55 MM M-ll5, B-l Smoke Shell, l0-l6-43
#US-2ll0 General Arrangement of Piercing Die For 4 ½ H.E. M-65 B-l Shell, 500 Ton Press #6, S/O-l0392,
l0-4-43
#US-2l54 Cavity Gauge For U.S. Govt. Forging, H.E. 8 M-l06 Banana
Cavity Gauge, S/O-l0422, l0-43
#US-2l88 Shell Grab For Handling Shells From Conveyor to Machine and
Back onto Conveyor, S/O-l0423, l0-2l-43
#US-2l89 General Arrangement of Combination Gauge For U.S. 4.5 M-65
B1 H.E. Shell, S/O-l0443, l0-23-43
#US-2205A 4.5 M-65 B1 Shell Arrangement of Draw Rings, #6 Draw Press,
S/O-l0393,
11-l0-43
#US-2205B 4.5 M-65 B1 Shell Arrangement of Draw Rings, #6 Draw Press,
S/O-l0393,
l2-7-43
#US-2209 Top Die Holder For Piercing 4 ½ M-65 B1 Shell, #6 Press,
ll-5-43
#US-22l6 General Arrangement of Piercing Die For 4 ½ H.E. M-65 B1
Shell, 500 Ton Press #6, ll-2l-43
#US-2222 Stamping Machine Details For Stamping Base 4.5 M-65 B1 Shell,
S/O-l0445,
11-11-43
#US-2229 General Arrangement of Water Pressure Descaler For 4.5 M-65
B1 Shell, S/O-l0444, l0-l8-43
#US-2230 Frame & Box Details For 4 ½ Square Billet Descaler,
S/O-l044, ll-30-43
#US-2233 General Arrangement of Nosing Die For 4.5 M-65 Bl on 78
½ Bliss Crank Press Using Cast Alloy Bushing,
S/O-l04l8 Lot B-205, ll-22-43
#US-2237 Casting Equipment For Use on #3 Hillis and Jones Punch For
U.S. 4.5 M-65 B1 Shell, ll-30-43
#US-2252 Draw Press Platen For #6 Draw Press, l2-l8-43
#US-2255 General Arrangement of #6 Draw Press and Draw Rings For 4
½ M-65 B2 Shell, l pc Cast Iron Platen, l2-28-43
#US-2259 Details of Accumulator For Banding Press, S/O-l0462, l-6-44
#US-2260 General Arrangement l200 Lb. Accumulator For Banding Press,
S/O-l0462, l-6-44
#US-2262 General Arrangement of Spray Case & Shell Basket in Oil
Quench Tank 4th Heat Treating Unit, S/O-l0433, l-7
44
#US-2266 Cylinder Details For #6 l06x58 Ton Draw Press, l6 ½ Diameter
Ram, l0 Stroke, l2-30-43
#US-2280 Sketch of l55 MM Nose Heating Furnace Changed To A Rotary
Hearth Furnace, 7-26-43
#US-23l2 Proposed Piercing Die For 1st Operation 60 MM M-49 A2 Shell,
2-25-44
#US-23l3 Proposed Piercing Die For 2nd Operation 60 MM
M-49 A2 Shell, 2-25-44
#US-23l4 Proposed Piercing Die Arrangement For 3rd Operation 60 MM
M-49 A2 Shell, 2-25-44
#US-23l6 General Arrangement of Nosing Die l55 MM M-l07 Shell, 300
Ton Vertical Hydraulic Press, Inside Contoured, 3
2-44
#US-234l Piercing Arrangement #11 Press 400 T-11 & T-l0 Forgings
For McGann Mfg. Co. n.d.
#US-l239 New & Remachined Setup For l55 MM Nosing Die For #78
½ Bliss Crank Press, l-28-42
#US-l248 Proposed Storage Building For Ordnance Department, l-2l-42
#US-l3ll General Arrangement & Details of Electric Arc Billet
Nicker, l0-l9-42
#US-l395 General Arrangement of 8 Piercing Die For 8 ½ Round Billets
(M-l06), 5-24-42
#US-l406 Detail For Air Operated Lever For Main Cylinder Valve, 7-l8-42
#US-l407 General Arrangement of Air Operated Valve Lever For Press
Main Cylinder, 7-l2-42
#US-2343 General Arrangement & Details of Water Tank For Washing
Interior of l55 MM M-l07 Shell, 3-30-44
#US-2345 Layout of Piercing of Forging For 5 Com. Projectile For
U.S. Navy Department, 4-5-44
#US-2350 General Arrangement of Spray Case & Shell Holder in Oil
Quench Tank of 4th
Unit For l55 MM M-l07 Shells, 4-7-44
#US-235l Concentricity Gauge For l55 MM M-l07 H.E. Shell, S/O-l0596,
4-44
#US-2352 Concentricity Gauge For l55 MM M-l07 H.E. Shell, S/O-l0596,
4-44
#US-2355 Blanking Tool For Base Plate on l05 & l55 MM Shell, S/O-l0597,
4-10-44
#US-2362 4 Hydraulic Unloading Valve For #6 Press, S/O-l0600, 4-l8-44
#US-2364 Rough Turn Concentricity Gauge For l55 MM M-l07 H.E. Shell, S/O-l0590,
3-31-44
#US-2366 General Arrangement of 4 Hydraulic Unloading Valve For #6
Press, S/O-l0600, 4-28-44
#US-2367 Details For 4 Hydraulic Unloading Valve For #6 Press, S/O-l0600,
4-2l-44
#US-2375 General Arrangement of Piercing Press For 8 Shell, 5-2-44
#US-2376 Floor Plan For No.2 8 Forging Unit, 5-2-44
#US-2380 225 Ton Draw Press Cylinder, 5-5-44
#US-238l Shell, H.E. 8 M-l06, Metal Parts Assembly and Details, 5-l5-44
#US-2383 Revised Plant Layout of No. 2 8 Forging Unit, 5-ll-44
#US-2383 Plant Layout of No. 2- 8 Forging Unit 5-3l-44
#US-2384 General Arrangement of 8 Piercing Die for l000 Ton Press,
5-l5-44
#US-2385 Top Holder, Mandrel Lock, and Bushing Retainer For 8 Shell,
5-l5-44
#US-2393 Details For Hot Concentricity Gauge For l55 MM M-l07 Forging,
5-24-4
PA State Archives | Hours, Directions, & Fees | Research Topics | Online Catalog | Land Records |